31
English
Assembling Cooktop Components
Installation Instructions
⁕
Match the D-shaped opening on the back of each knob
with the D-shaped valve shaft of the appropriate burner,
push the knob fully onto the shaft.
a.
Put the knobs with the words “MAX GRIDDLE” on the
center valve shafts (36", 48" models) and the right-side
valve shafts (30" model).
b.
Put the remaining knobs on the other valve shafts.
Final Installation, cont.
Installing the Burner-Control Knobs
Two types of knobs come with the range. The knobs for the center burners (36", 48") and right-side burners
(30") feature the words “MAX GRIDDLE,” which refers to the maximum heat setting for a burner over which the
griddle is placed. Exceeding the MAX GRIDDLE heat level may damage the griddle.
Pro Knob for
HDPRS Models
Epicure Knob for
HDERS Models
Do not operate the cooktop unless all burner components are properly assembled.
Installing SimmerSear Burner Components
1. Unpackage the burner components.
2.
Install the burner head so the burner head’s locating
tab is in the burner base’s keyed hole.
3.
Install the burner ring so the ring’s tabs fit into the
slots in the head.
4.
Install the burner cap so the ridge on the bottom of
the cap fits over the perimeter of the ring.
Either style of cap (brass or porcelain) may be used.
