User Manual AX32
Doc no. AX32-8002-A-4
Rev. date 140124
Page 15 of 31
More AX32 units and also AX24 and NTP Penta 721units can be operated via DADman as well.
Note that the order from left to right in which DADman shows the units are defined via
the unit ID number which is stored in the units. The number can be changed by clicking
the ID field in the corresponding section in the DADman window.
The name of each unit can also be edited by clicking the name Window. This name is stored in the unit, and
can be seen in the AX32 display.
Also names for each analogue input and output channel can be assigned. This name is only stored in the
DADman settings file and not in the AX32 unit.
AD Section
The AD section refers to the mic/line AD and line AD cards. If there are no AD cards in the AX32, the section
will be blank.
The screendump above shows the various settings in the AD section.
The sliders for the MIC gain can be adjusted with the mouse or with the UP/DOWN and PAGE UP/DOWN
keys. The mouse moves the gain setting in steps of 0.5 dB whereas the UP/DOWN keys move it in steps of
0.1 dB.
Mute
MIC/LINE
selection Phantom
power
ON/OFF
Phase invert
Mono/stereo
selection
Signal
above -42
dB FS
Signal
above -0.5
dB FS
MIC gain
setting
LINE
clipping
level
LINE
clipping
level,
fine-tune
Selected
channel
