1. Each time the button is pressed, the mode is changed sequentially
between level 1, 2, 3, AUTO and power off.
(AUTO mode only applies to M1+ models.)
2. After entering "AUTO" mode, the LED flashes by color and then
each LED is repeatedly turned on and off one by one clockwise.
(This operation only applies to M1+ models.)
[M1+ AUTO mode]
1. VOC sensor operates the proper auto mode, depending on the condition of inner air and
controls the air circulation.
2. LED colors is displayed, depending on the standard of Puripot to show the quality of inner air.
3. If you think the condition of inner air and colors of LED donʼt match, please switch on the puripot
after ventilation for 24 hours of the room. Then puripot will be worked well.
· Use the USB cable (C-type) provided to connect the product to the power
source
· The default fan speed is set to ʻlevel 1ʼ when the product is first shipped
from the factory.
· The LED on the operation mode button of the product can be used as a
mood light in a dark environment.
· You can turn on or off only the mood light in the product while it is on a
normal operation mode.
Connecting Power
LED Mood Light On/Off
Adjusting Operation Mode
1. The LED mood light will be turned off when you press and hold
the operation mode button for more than one second.
2. Pressing the operation mode button will turn the LED back on.
Level 1
Level 2
Level 3
Blue : Good
Green : Fair
Yellow : Bad
Red: Very Bad
