Daeil Fish Cooler DBI-030, Owner'S Manual

- 1 -

1 SAFETY

The coolers are designed and built with safety as a prime 
consideration; industry-accepted safety factors have been used in the 
design. Each cooler is checked at the facotry for safety and operation. 
All necessary adjustments are made before shipment.

Follow the maintenance schedules outlined in this manual for good 
performance and safe operation. Maintenance should be done only by 
qualified person with proper tools.

Carefully read the following safety rules before proceeding with 
installation, operation or maintenance. The rules are essential to 
ensure safe cooler operation. Failure to follow these rules void the 
warranty or results in cooler damage or peronal injury.

1. Do  not install or try to repair a cooler that has been damaged in 
shipment. See RECEIVING AND INSPECTION for instructions.
2. Electricity has the potential to cause personal injury or equipment 
damage. Before doing any work on the cooler, be sure the electrical 
supply has been locked.
3. Do not operate the cooler at the temperature above the maximium 
conditions (see table 1).
4. Always supply electrical power that complies with the voltage shown 
on the data label.
5. Work in the refrigeration system must be done only by a competent 
refrigeration mechanic.
6. Use only manufacturer’s genuine replacement parts. The 
manufacturer bears no responsibility for hazrads casued by the use of 
unauthorized parts.