background image

Black Bear is a registered trademark of Daekyung Co., Ltd. 
1521-6 Dadae-dong, Saha-gu, Busan, Korea    Tel: +82)51-264-6611  Fax: +82)51-264-6615 

BLACK BEAR HOIST 

4. Preliminary Cautions Before Installation

 

4.1 Check for Completeness 
     

Black Bear hoists/trolleys are manufactured under strict quality control and inspection.  

     Please check for following details of the hoist for completeness: 
     1) Hoist Body 
     2) Hook & Hook Holder 
     3) Load Chain / Hand Chain  

     

4) Roller / Hanging Plate 

 
4.2 Check for Specification 

     Please check for your specifications before use.  
     1) Capacity (Ton), Load Chain Length, Hand Chain Length 
     2) Beam Specification (Trolley Beam Size) 
     3) Contact manufacturer immediately if the specifications differ. 
     

 

4.3 Areas of Application 
     

1) This hoist/trolley is NOT explosion-proof. The hoist/trolley is NOT to be used in  

        environments that are open to potential explosions.  
     2) Please consult with manufacturer first if the hoist/trolley is going to be used in   
         environments with high (higher than 40°C) or low (lower than -20°C) temperatures,   
         or with high humidity (more than 90%), or environments that are open to chemicals    
         and other particular situations.  
     3) Observe temperature range. Metal parts of the hoist/trolley turn weak and could break in   
         low temperatures. Consult manufacturer if your are in doubt.    
     4) Do not use the hoist/trolley in high humidity environment. 
         Lifetime of the hoist/trolley will shorten if it is exposed to rain. If used outside, please  
         protect the hoist/trolley (entire equipment) with proper covers to avoid rain. 

 
4.4 Safety 
     

All personnel operating the hoist/trolley should use and wear proper safety measures  

     (gloves, safety shoes, safety helmet) to avoid possible danger. 

- 10 - 

Summary of Contents for BLACK BEAR HOIST DS Series
























Reviews: