27
<CHECK>
If the oil is low, the oil warning indicator
will turn on. Turn the main switch to ON
in order to check whether the oil warning
indicator switches on. If it does, put oil in
the oil tank.
<HEADLIGHT, TAILLIGHT>
Turn a main switch “ON”. Check the
lights for proper operation by operating
the switch and also a lens for damage or
contamination.
<INSPECTION OF WINKER>
Turn a main switch “ON”. Check the lamp
for proper operation (front/rear and
right/left) and sound by operating the
switch, and also a lens for damage or
contamination.
<INSPECTION OF STOP LAMP>
Turn a main switch “ON”. Check a stop
lamp for proper operation by operating the
front wheel and the rear wheel brakes, and
also a lens for damage or contamination.
CAUTION
●
Do not allow the engine to stay at a low
level. The engine will become severely
damaged if the vehicle is driven while
the oil warning indicator is on.
ENGINE OIL CHECK
OIL WARNING INDICATOR
LIGHTS AND WINKER INSPECTION
CAUTION
●
The lighting head light emits very
hot heat. If you touch with naked
hand, it may be burned.
●
When replacing head light lamp,
stop lame and winker lamp, use only
a bulb of rated capacity. Using a
lamp exceeding the rated capacity
can cause over-discharge of battery
and wire burning. It can lead a fire.
●
If the head light is turned off due to
aging while driving at night, it will
cause an accident by obstructing
driver’s view. Check the condition
daily.
●
If the tail light is off while driving at
night, it will cause an accident by
failure of notice by the other drivers.
Check the condition daily.
Summary of Contents for BONITA - CATALOG
