Daema DFZ-1822WB, User Manual

General knowledge for usage

Set different cooling temperatures according

to different goods. Too low cooling 

temperature will waste power consumption.     

Keep some spaces between stored goods.

It do good for cooling air circulating and 

heat exchange and a better cooling effect

will be achieved.      

Seal the food by fresh kept bags or closed

container to avoid smell-mixed or dry.      

For hot food, hold it cooled and then put

into the appliance. If put it in hot status, it

will decrease the cooling level of the 

goods nearby.        

Open the door as briefly as possible. 

Make sure the door closed wholly to save 

power consumption.      

Put labels marked time onto the goods. 

The goods stored early should be taken

out early.        

When switching off or a power cut, must

restart after 5 minutes minimum. 

Or it will shorten the compressor life or 

even damage the compressor.        

If know a power cut in advance, set the 

thermostat for a low temperature and keep the

appliance cooling for some time. And open the

door as briefly as possible. When power is cut,

try not to open the door and do not add goods

into the appliance.      

8

Usage at the first time

Place the appliance according to the 

installing requirements.

Open the door for air ventilating.    

Clean the inner cabinet before using.    

After installing the appliance, wait for 30 minutes at least  before switching on the appliance. 

( During transportation the oil in the compressor may have flowed into the refrigeration system.)

At the beginning, the cabinet is hot and the compressor will work for a long time and then stopped 

by the thermostat at the set temperature. At that time, the compressor can works and stops regularly.

Recommend to put goods into the cabinet when the cabinet temperature reaches the set 

temperature. 

Thermostat

77

The freezer has double functions of cold storage and freezing, and the temperature can be adjusted

by the temperature control knob of the control panel.

When the temperature control knob is within the range of "refrigerate", the freezer is cold storage

 function, and the temperature range is - 2    ~ + 12   .When the temperature control knob is in the
 range of "freeze", the freezer is a freezing function, and the temperature range is-12   ~-26   .

Turning clockwise, the stronger the cooling degree, the longer the continuous operation time of the
compressor; otherwise, turning counterclockwise, the weaker the cooling degree, the shorter the

continuous operation time of the compressor.

When the temperature control knob is within the range of "fast freeze", the freezer is the strong 

cooling function.

The temperature will be kept below - 20   , and the compressor will be forced to operate continuously. 
Under normal use, it is not necessary to adjust this section to achieve energy-saving effect. If you
want to use this function, please do not exceed 2 hours. After use, you must remove it to avoid
compressor damage caused by long-term operation.

Please adjust the temperature control knob according to the local climate requirements to achieve

 the power saving effect and extend the service life of the compressor.

℃

℃

℃

℃

℃