Operation manual
a. The wheel of the wheechair should
be placed on the center of the
support and reverse until the tire
touches the support.
b. Confirm the flickering of the green
lamp(1) and press red switch(2).
c. The green light will change from
flickering to lighting if the fixation is
complete.
d. If you want to unlock the fixation,
press the red switch.
How to unfix manually
a. Loosen the bolts with flat tools and
take off the cover.
b. Put your finger into the ring of the
pin and pull it.
Belt fixture and loosening
Use the hook on the belt to hook the belt
on the front(1 hook) and rear (2 hooks).
Turn the lever (2) to secure the
wheelchair.
When you loose the belt, press the
lever(1) at the back to release the hook.
The belt will automatically retract.
3-72
DEVICE CONTROL TIPS
Wheelchair Fixture Belt and Lock-ups
OM-S049
OM-S051
OM-S050
CAUTION
Fix the wheelchair on the support
device and pull the wheelchair
brake.
Do never put your handsor feet on
the supporting device.
Do not use the device for any other
purposes.
Secure the wheelchair with a safety
belt.
CAUTION
Securely tighten the hook when
securing the wheelchair.
You must pull the wheelchair break
after seuring it.
Fully retract the belt after the hook
is released.
·
·
·
·
·
·
·
Summary of Contents for BS Series
Page 1: ......
Page 13: ...DEALER IMPRINT...
Page 153: ...6 11 VEHICLE INSPECTION AND MAINTENANCE OM F115E TYPE B...
Page 260: ......