Changing the Engine Oil
a. Place a container under the oil fan
drain plug to hold the engine oil.
b. Pull out the drain plug form the oil fan
while the engine is warm, and open
the oil inlet cap for easier draining.
c. After the oil gas been completely
drained, assemble the drain plug
with a new sealing.
d. Dissemble the oil filter.
e. Assemble the new oil filter.
f. Fill the new engine oil through the oil
inlet, idle the engine for about 5~10
minutes, and check the amount of oil
using the oil dipstick gauge.
Supplement more oil when necessary.
6-20
VEHICLE INSPECTION AND MAINTENANCE
OM-H027E
※
DV11 Engine
WARNING
Since the oil and the engine
component parts are hot when
conducting the inspection right after
operation of the vehicle, be careful
not to get burned.
CAUTION
A new sealing must be used, and
follow the suggested tightening
torque. ( Approximately 8kg.m )
CAUTION
·
Always use genuine parts for the oil
filter, and make sure not leave out
the sealing and the o-ring during
assembling.
·
Always follow the regulated torque
for the oil filter housing fixing bolts.
(Approximately 5kg.m)
Summary of Contents for BS Series
Page 1: ......
Page 13: ...DEALER IMPRINT...
Page 153: ...6 11 VEHICLE INSPECTION AND MAINTENANCE OM F115E TYPE B...
Page 260: ......
