Replacement of Oil
a. Unscrew oil drain plug when the oil
is hot and then stop the engine,
disengage oil filter cover and change
filter, oiling, and washer.
b. After oil drain plug is installed,
disengage oil level gauge and fill oil.
c. Check oil level.
Oil checkup must be performed on a flat
level ground, and must be performed
after driving when the oil is hot.
Oil level checkup must be performed
by disengaging oil fill and checkup
plug, and oil level must adjusted so
that the oil flows down to the oil fill and
checkup plug.
Replacement of Oil
a. Loosen the drain plug and tighten it
back after releasing the oil.
b. Open the oil fill and checkup plug
and refill oil until overflowing.
c. Close and secure the oil fill and
checkup plug.
●
Oil Change and Checkup Period
Replacement : Refer to
“
Oil Standards
”
(6-7 page).
Checkup and Refill : At the first
1,000km and every 4,000km.
6-28
VEHICLE INSPECTION AND MAINTENANCE
Rear Axle Oil
REFERENCE
Oil capacity is directed oil capacity,
and must be kept in checking oil level.
OM-S073E
CAUTION
When changing automatic oil, also
change the filter.
OM-B224E
·
·
Summary of Contents for BS Series
Page 1: ......
Page 13: ...DEALER IMPRINT...
Page 153: ...6 11 VEHICLE INSPECTION AND MAINTENANCE OM F115E TYPE B...
Page 260: ......
