Cleaning the element
If the element is polluted in a dried
condition, use the compressed air to
blow the element from inside out.
●
When the Element is Covered with
Soot
Put the element into lukewarm water
for about 30 minutes, in which some
element cleaning detergent is
dissolved in. Take out the element and
wash it under running water.
(Pressure below 2.8kgf/cm
2
)
●
Element Inspection
Check for any damages by shining a
light inside the element after it is
completely dried.
6-34
VEHICLE INSPECTION AND MAINTENANCE
CAUTION
Use the compressed air with the
pressure below about 7kgf/cm
2
, and
always blow the dust and contamination
from inside out.
OM-B235
OM-B236
Summary of Contents for BS Series
Page 1: ......
Page 13: ...DEALER IMPRINT...
Page 153: ...6 11 VEHICLE INSPECTION AND MAINTENANCE OM F115E TYPE B...
Page 260: ......
