Pushing the lever flickers the right turn
signal lamps and pulling it flickers the
left turn signal lamps.
It activates both turn signal lamps on
vehicle
’
s exterior and those on the
instrument panel, and indicates turn or
lane change signals to other vehicles.
The light switch operates by turning the
switch to 1st and 2nd modes, and the
lights work as follows.
•
OFF : Turned off
•
1st mode : Sidelights, Tail Lights,
Instrument Panel Lights,
License Plate Lights.
•
2nd mode : Headlights, Sidelights,
Tail Lights,
Instrument Panel Lights,
License Plate Lights.
3-36
5. SWITCHES
DEVICE CONTROL TIPS
Turn Signal Activation Lever
Light Switch
OM-B109
OM-B110E
CAUTION
Leaving the turn signal lamps
activated while the engine is turned
off may discharge the battery.
REFERENCE
Turning the steering wheel to make
the turn and returning it to its
original position to complete the
turn while the lever is activated,
automatically lead the lever to its
original position and the indicator
lamps to turn off also.
Replace the signal lamp bulb when
it fickers faster than normal speed,
since it indicates that the bulb is
out.
If you operate the turn signal lamp
while the light switch is in the 1st or
the 2nd mode, the cornering lamps
are also activated on vehicles
equipped with cornering lamps.
·
·
·
Summary of Contents for BS Series
Page 1: ......
Page 13: ...DEALER IMPRINT...
Page 153: ...6 11 VEHICLE INSPECTION AND MAINTENANCE OM F115E TYPE B...
Page 260: ......
