Ignition occurs 15~30 seconds after
the activation of the drive motor and
the circulation pump motor, and as a
result, combustion begins. At the
same time, ignition indicator lamp(
⑤
)
turns on.
The combustion stops and the
ignition indicator(
⑤
) lmap turns off
when the coolant
’
s temperature
reaches over 75
℃
as a result of
successful combustion process.
The drive motor activates only for
about 3 minutes while the circulation
pump continuously remains activated.
Re-ignition occurs automatically
when the coolant
’
s temperature
drops below 65
℃
.
Press the
“
STOP
”
button(
①
) to
deactivate the preheater. Upon such
action, combustion stops, and the
drive motor and the circulation pump
motor stops after about 3 minutes of
activation.
Position the battery main switch to the
“
OFF
”
position after the circulation
pump motor has completely stopped,
when parking the vehicle.
Pressing the pump button(
④
) turns
on the lamp, activates the circulation
pump motor only, and increases the
heating efficiency.
Warning lamp(
②
) is turned on when
there is a problem with the preheater.
The power button(
①
) activates the
ventilator
’
s shutter, which opens/closes
the ventilator.
Activating only the power button(
①
)
enables ventilation using the air
circulation caused by the natural wind,
since it only opens the ventilator
’
s
shutter and does not activate the fan.
3-61
DEVICE CONTROL TIPS
Automatic Ventilation (OPTION)
OM-B500
·
·
·
·
·
·
·
Summary of Contents for BS Series
Page 1: ......
Page 13: ...DEALER IMPRINT...
Page 153: ...6 11 VEHICLE INSPECTION AND MAINTENANCE OM F115E TYPE B...
Page 260: ......
