6
30 Inch Tower Fan
Model: COL1066
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Operating Instructions
Manual Control
•
Place the fan into the desired position ensuring that it is on a solid, even surface
and vertical.
•
Insert the mains plug into the nearest socket, press the
Speed Control Buttons
(2) as follows: Button 1 for low speed, 2 for medium speed and 3 for high speed.
Press the ‘0’ button to switch the fan off.
For normal manual operation, the
Timer
(1) must be in
the ‘
ON
’ position on
the dial.
Oscillation mode
•
Press the
Oscillate Button
(3) to enable the fan to oscillate from side to side to
disperse air over a larger area. Press the button again to stop the oscillation
mode.
Using the timer
•
Rotate the
Timer
(1) to the desired number of minutes that the fan is required
to be on for. Once the timer control has returned to the
‘
OFF
’
position on the
dial, the fan will switch off.
For normal manual operation, the
Timer
(1) must be in
the ‘
ON
’ position on
the dial.
Care and Use of your Fan
•
Ensure that the fan is not connected to the mains supply before cleaning.
•
Wipe the fan body clean with a clean, soft damp cloth.
•
Do not immerse the fan or its cord in water or any other liquid.
Once the base is
attached, thread the
mains cable through the
inner cord guides and
under the cord grip and
tighten the two cord
grip screws.
4
Finally push the
four feet into the
holes in the base of
legs.
5
