11 Ver1.0
2. Procedure of software updating:
A. Make sure SD card has the FW for updating (Place FW file zburnT_C7.run.elf and directory
DIC
Mat the root directory of the SD card).
B. Place the SD card to the lock status.
C. Place the SD card and the battery into the camera and open the camera.
D. Now you shall see the LED on the Direction Button flashes (If no flashing, please check if the
file on the SD card is correct).
E. When LED is flashing please make sure the camera will not lose the power, otherwise it will
be failed when recording onto FW.
F. Wait till the LED stops flashing, please take out the SD card, power on and test if FW is
correctly updated.
IV. Disassembling
1.
Remove six screws on the cover 2. Open the left cover and take off the front cover
3.Remove seven screws on the main 4.Remove crews on the sensor board
board and the speaker holder
All manuals and user guides at all-guides.com
all-guides.com
