background image

14

Teletext (Option)

SWITCHING TELETEXT ON/OFF
Press the TELETEXT button (

). The index page viewed last will appear.

Press the TELETEXT button to return to the TV mode.
Note that theTELETEXT at this TV set is operated to Level 1.5.

SELECTING PAGES
The NUMBER button 0..9 are used to enter a page 
number.
The selected page number appears at the top of the screen and the page appears after a short time.
The UP/DOWN buttons increase or decrease the current page number step by step.

PAGE HOLD
Several sub pages can be combined under a page number and are scrolled at an interval determined by
the television station.
The presence of sub pages is indicated by, for example, 3/6 beneath the time, which means that you are
looking at the 3rd page of a total of 6 pages.
If you want to look at a subpage for a longer period of time, press the HOLD(

) button.The contents of

the subpage shown are kept on the screen and no longer updated or switched to other subpages. 
Pressing the HOLD button again, the current subpage appear.

COLOUR BUTTONS IN TOP/FLOF TELETEXT
A red, green, yellow and cyan field is shown at the bottom of the screen.
If TOP or FLOF teletext (FASTEXT) is transmitted by the station, pressing the corresponding colour
button on the remote controller, you can select the desired page easily.

INDEX PAGE
You can switch directly to the programme preview (with TOP text) or the overview page of the station
you are currently viewing by pressing the 
INDEX(

)button

CALLING UP SUBPAGE DIRECTLY
Pressing the SUBPAGE (

) button, “Page No. / Subpage No.” appears at the botton of the screen.

Press RED / GREEN button or 0....9 number button directly to enter the Subpage you want, then the
subpage is sought and displayed.

To exit, press SUBPAGE (

) button again.

WATCHING TELEVISION DURING TELETEXT MODE
Some pages are continually updated, for example, stock market reports, sports announcements, and the
latest news.
If you want to watch television and stay informed at the same time, press CANCEL (

) button.

The regular programme is still visible and the teletext programme number appears at the top of the
screen.
Pressing the CANCEL button again, the teletext page appears with the updated information. 

Summary of Contents for DTA-14V1







































































Reviews: