CP-093F Service Manual
6.4 TIP
A. Not display blue Logo Picture.(or Not turning )
--> a.Check DVD 3.3V at PD01 # 11,12 TV side pulling out connector.
: DVD 3.3V is 3.25V ~ 3.45V
: Check DVD 5V,12V,1.8V.
--> b.Check PAD01,PAD02.
: Change direction DVD and TV.
: Observe defected connector lines.
--> c.Check communication lines.
: Host Data In/Out, Acknowledge,Host strobe,Request.
B. DVD Firmware Version check.
--> OPEN-DISPLAY-UP-DOWN-LEFT-RIGHT.
C. Region Code check.
--> OPEN-0-5-2-0-UP-DOWN-LEFT-RIGHT.
: Check Region with Title.( Default/Europe is Region 2 )
* Exception above, you must substitute DVD module by module.
* CP-093F ( 21 INCH ) is NO SOUND when AV2 PCB is not connected.
36
All manuals and user guides at all-guides.com