Methods of exchanging main parts
2) Slightly pull the evaporator to the arrow's
direction.
3) Move the entire eveporator upward the
pipe center to the arrow's direction.
(Do not crumble the part A of the
accumulator during the process.)
4) Cut the both ends of glass tube heater
tube heater lead wires and insulate and
seal lead tip remaining in refrigerator
with tape etc.
5) Pull out the glass tube heater from the
heater supporter with heater covers
remaining.
(upper and lower) (Do not apply much
power on the heater supporter.)
-7-
Raise upward
Heater Cover
(Top)
Glass tube
heater
Lead wire
Heater fixture
Heater Cover
(Bottom)
