KOC-8HAFR_
10
KOC-8HAFR_
11
Operation
»G
eneral
• If you want to set something, it is important that the display shows the
':0'
and not a selected
function. If you always press the stop button first, you can be sure that this is the case.
• When the microwave finishes the programme, you hear three beeps and the display shows
"End"
. The microwave will continue to give a beep every minute until the stop button is
pressed or the door is opened.
• When the function has finished, the fan will continue to run for some time to cool down. The
display will show the
':0'
and
"COOL"
alternately.
• When you open the door, a running programme stops. This also happens if you press the
stop button. The fan will continue to run. You can start the programme again by pressing the
start button.
• Do not use the microwave if it is empty.
• After the grill/oven/combi function has been used, you must let the microwave cool down
before you use it again. Use over and above normal domestic usage may cause thermal cut-
out to function.
To set Stand-by power "0" mode
1. Push the
STOP/CLEAR
button.
“ : 0” appears in the display.
2. Press and hold the
STOP/CLEAR
button until display is turned off.
3. To cancel the stand-by power "0" mode, press and hold
ECO
button until display is turned
on. The oven is again available for normal use.
»S
tand-by power "0"
This function is used for saving energy.
DESUK_KOC-8HAF7R.indd 12
2014-01-02 오전 10:28:42
