9
CONTROLS
SETTING THE CLOCK
When the oven is first plugged in, the display will show “:0” and a tone
will sound. If the AC power
ever goes off, the display show “ : 0” when the power comes back on.
1. Touch the CLOCK pad.
This is a 12 hour clock system.
2. Touch the CLOCK pad once more.
This is a 24 hour clock system.
3. Enter the correct time of day by touching the TIME
SET pads
in sequence.
4. Touch the CLOCK pad.
The display stops blinking, and the colon starts
blinking. If you selected 12 hour clock system, this
digital clock allows you to set from 1:00 to 12:59. If
you selected 24 hour clock system, this digital clock
allows you to set from 0:00 to 23:59.
NOTE: If you attempt to enter an incorrect time, the time will not be set
and a error signal tone will sound. Touch the CLOCK pad and
re-enter the time.
NOTE : This oven has multiple clock systems.
If you want 12 hour clock system, omit this
step.
+30 sec
+30 sec allows you to reheat for 30 seconds at full power by simply
touching the +30 sec pad.
By repeatedly touching the +30 sec pad, you can also extend reheating
time to 5 minutes by 30 second increments.
1. Touch the +30 sec pad.
When you touch the +30 sec pad, ":30" is displayed.
After 1.5 seconds, the oven starts reheating.
KOR-660B3_KOR6LCBWWAE013AW00(영)_미주향(A5).indd 9
16. 2. 16. 오전 9:16
Summary of Contents for KOR-660B3
Page 6: ......