2. FUNCTIONS
A. "TEMP" Button of the Panel
- Temperature control of Refrigerator compartment
- 5 step mode of successive temperature mode
- Initial mode by power input: step 3 (NOR)
- Temperature will be set if the button doesn't get pressed again within 5 sec.
- Whenever pressing "TEMP" button, setting is repeated in the order of
"NOR" → "MAX-NOR" → "MAX" → "MIN" → "MIN-NOR" (LED DISPLAY ON)
B. Temperature of Refrigerator Control
- COMP and FAN will be controlled by the on/off condition of each mode
- Temperature Difference of Refrigerator each step :
C. Temperature of Refrigerator at "NOR" OFF point:
-3.7
℃
D. S-Cool (Quick REfrigeration) Mode
- Press "S-Cool" Button of the Panel and make "S-Cool" LED on.
- Comp & Fan are on until R-sensor reaches to "Over Refrigeration OFF Point", -9.5
℃
- After the reach of -9.5
℃
, Step 5(MAX) mode continues.
- When "S-Cool" mode lasts for about 40 minutes, it returns to general operation mode.
E. Temperature of Freezer Control
-
It will be only controlled by using “KNOB F LOUVER” in the Freezer Comaprtment.
- COMPRESSOR
- FAN
CONTROL OBJECT
INPUT
- PCB Control Panel "TEMP" and "S-Cool" Buttons
- R sensor
2-2. Temperature Control of Refrigerator Compartment
1
2
3
4
5
9.4
7.1
4.9
3.4
1.2
-0.5
-1.6
-3.7
-5.2
-7.2
OFF(
℃)
ON(
℃)
STEP
10
