11
R e c o r d i n g
C A S S E T T E S
Timer recording
Timer review - erasing or changing
Auto tracking
◆
For timer recording, clock, date, and stations
must be set correctly.
◆
Load a cassette with its safety tab in place and
with sufficient free space for the recording.
◆
To enter station numbers using the cursors
VW
.
◆
You can switch your televideo off during recording using the
button.(Don’t use the
main power button (ON/OFF) on the front panel of the set.)
The televideo will switch on and off automatically to record the timer event.
◆
If you have made a mistake, move to the position you want to change using the
VW
CB
button and change the setting.
◆
The recorder will eject cassettes which have the safety tab removed.
◆
If you wish to record from a satellite receiver select under “Pr” the satellite programme
location or AV (depending on the connection with the aerial cable or a SCART cable.)
NB : Leave the satellite tuner switched on and to the programme you want to record.
Call the televideo’s “menu”, choose”Timer programme”.
Select a free timer memory.
Set ......
- the date (date, daily = osd is displayed ”day”, sun~ sat)
- start and end time.
- the recording speed.
Call the televideo’s “menu”, choose “Timer programme”.
Select the programming to erase or change If you want to erase the programming press button CLEAR.
If you wish to make changes :
Move to the position you want to change using the
VW CB
buttons.
Change the setting using the
VW
buttons.
If you press the 0/ATK key in Playback mode, the televideo will operate the auto tracking function again.
VW
: Select
CLEAR: Delete
CB
: Access
: Store
MENU : Previous
Timer programme
No. Pr.
Date Start
End
PDC SP/LP
1
01
05
14:18 17:15
Off
SP
2
---
---
--:--
--:--
Off
SP
3
---
---
--:--
--:---
Off
SP
4
---
---
--:--
--:---
Off
SP
5
---
---
--:--
--:---
Off
SP
6
---
---
--:--
--:---
Off
SP
PDC(VPS)
If a programme starts late or runs over, programme delivery control PDC(VPS) makes sure it gets recorded.
In rare cases, poor reception or a fault at the TV station may stop PDC(VPS) from working properly: if this
happens, set PDC(VPS) to ‘NO’ when you programme the timer.
Allow a few extra minutes recording when PDC(VPS) is off. Your television guide might show a PDC(VPS)
start time different to the normal programme start time; be sure to enter PDC(VPS) start time.
