2.
Home :
When user is at home, in this mode, some
areas can be monitored and alarms.
3. Deactivate :
The control panel cancels the
monitoring state, and only the SOS button or
accessories set to "Always" mode can trigger the
alarm.
• ACCESSORY MODES
1. Exit /Home
：
When the panel is in the "Away" or
"Home" state, the panel will alarm after the sensor is
triggered. It is recommended to set the outdoor sensor
to this mode.
2. Exit :
When the panel is in the "Exit" state, the panel
will issue an alarm after the sensor is triggered.
3. Always :
Regardless of the status of the panel,
whenever the sensor is triggered, the panel will
sound an alarm. It is recommended to set this mode
for gas leaks or smoke detectors etc.
4. Disable:
The security panel will not respond to the
alarm request from the sensor configured in this
mode.
You can choose which sensors are armed in Exit and
Home mode, or both, or always active.
For example, if you want to avoid triggering the alarm
when you are at home, you can set the specific sensor
to "Go Out" mode.
Summary of Contents for AM301
Page 21: ...X Comment remplacer la batterie ...
Page 34: ...DAEWOO SECURITY Alarm system accessories QUICK INSTALLATION GUIDE FR ALARM SYSTEM AM301 ...
Page 43: ...4 You have selected the device to add To finalize this action press 1 Main page Add a device ...
