Clear CMOS
BIOS setting values and password are stored in CMOS RAM. To clear
CMOS Data of your computer, please open the computer
Z-3 of
with
jumper during
seconds, then CMOS data
be cleared. For normal operation, please short l-2 of
and close
your computer chassis.
Power ON
Header is used to provide a way of the user to. turn the system on.
Connecting it to the
power on push button on
the front panel.
Note
In order to prevent the system from shut down by mistake, the
LX provides one optional item on the “Power Management Setup”
manual of the BIOS setup.
This item called “Soft-Off by
The function is as follows:
Delay 4
:
1. Pushing the button one time will change the system from normal
operation to suspend state. Pushing the button again will wake
the system.
2. Pushing the power button more than 4 seconds will shut down the
system.
Instant-Off:
Pushing the power button one time will turn the system on, pushing
again will torn the system off.
Standby
Supply Connector
Signal
5v
Please don’t insert power switch connector in
Installation
:
JP12
2-3 : Max. (Default)
Clear CMOS
: Normal Operation
2-3 : Clear CMOS
Table 2-4. Jumper Settings
Table 2-5.
User’s Manual 2.13
