Built-In BIOS Setup Program
AGP Aperture
sets to the effective size of the Graphics
Aperture used in the particular PAC configuration. The 256MB
aperture size is not practical for most applications and therefore the
size must be set to a smaller practical value. The available options are:
SDRAM RAS-to-CAS Delay sets the delay in assertion of
from
the assertion of
in
clocks. The available options are:
-Slow (default)
-Fast
SDRAM RAS
Time sets the RAS
requirements
for the SDRAM memory type in
clocks.
The available options are:
Fast
SDRAM CAS latency Time sets the CLT timing parameter of SDRAM
expressed in 66 MHz clock.
available options are:
-2
CPU Warning Temperature -When the temperature of CPU meets the
preset warning temperature
CPU automatically downs the clock
for cooling CPU. It is recommended that
“Enabled” should be set for
proper
operations of the system.
-Disabled
Current CPU Temperature This field only displays the current CPU
temperature.
“Current CPU
and “CPU
temperature”
be
when the thermal detection circuits are
installed.
Built-In
BIOS Setup Program
ROM
BIOS
POWER MANAGEMENT SETUP
AWARD
INC.
: Max Saving
‘M Control by
: Yes
Jideo Off Method
:
Jideo Off After
: Standby
Use IRQ
Mode
Mode
Mode
: Min
Power Down
Duty Cycle
: 62.5%
Active in Suspend : Disabled
VGA Active Monitor
: Enabled
by
: Delay 4 Sec.
off Suspend : Enabled
Resume by Ring
: Disabled
Resume by Alarm
: Disabled
IRQ
Suspend
: Disabled
Reload Global Timer Events
Disabled
Primary IDE
: Enabled
Primary
1
Enabled
Secondary WE 0
: Enabled
Secondary JDE
: Enabled
Floppy Disk
: Enabled
Serial
Enabled
Parallel Port
: Enabled
ESC : Quit
:
: Help
F5 : Old Values
Color
F6 : Load Bios Defaults
F7 : Load Setup Defaults
Figure 3 -5 Power Management Setup Screen
Power Management Allows user determine how often the Power
Saving
The available options are :
-Disable
Min Saving
-User Define
