Built-h BIOS Setup Program
After making all modifications in the SETUP program, go to the option
“Save
Exit SETUP” then press the <Enter> key. The program will
display the following screen.
Press
to confirm the changes made, and the
or the
keys
if further modifications are sill necessary before
the SETUP
program. Once the
key in pressed, the system will automatically
exit the program and reboot.
However, if you want cancel all changes made under the
program, go to the options “Exit Without Saving”
Press
and the system will
the SETUP program then reboot
without saving any of the change made.
You may also use the
key to
the new settings.
