Assembly
1. Place the rear
section of the stand
onto the base of the
tower fan.
2. Lower the front
half of the stand on
top of the rear half
of the stand such
that the two latch
together. Ensure that
the mains cable is
fed through the hole
in the centre of the
stand.
3. Attach the stand
onto the base of the
tower fan by threading
the screws through the
stand assembly and
into the base of the
tower fan.
4. Once the base is
attached, thread the
mains cable through
the inner cord guides
and under the cord
grip and tighten the
two cord grip screws
5. Finally push
the four feet into
the holes in the
base of legs.
