Operating Instructions
Manual Control
• Place the fan into the desired position ensuring that it is on an even
surface and vertical.
• Insert the mains plug into the nearest socket, press the speed control
buttons as follows: Button 1 for low speed, 2 for medium speed and 3
for high speed. Press the ‘0’ button to switch the fan off.
• NB for normal manual operation the timer control must be in the ‘on’
position on the dial.
Oscillation mode
• Press the oscillation button to enable the fan to oscillate from side to
side to disperse air over a larger area. Press the button again to stop
the oscillation mode.
Using the timer
• Rotate the timer control to the desired number of minutes that the fan
is required to be on. Once the timer control has returned to the ‘off’
position on the dial, the fan will switch off.
• NB for normal manual operation the timer control must be at the ‘on’
position on the dial.
Care and Use of your Fan
• Ensure that the fan is not connected to the mains supply before
cleaning.
• Wipe the fan body clean with a clean, soft damp cloth.
• Do not immerse the fan or its cord in water or any other liquid.
Technical Data
Voltage : 220-240V
AC
50Hz
Rated
power
: 50W
Model
: COL1066
