10
Cyclone Freedom Pro 22.2V Cordless Vacuum
FLR00040
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
7.
First replace the
Cyclonic Filter
(2) into
the
Dust Compartment
(4), ensure that
the two arrows on the cyclonic filter and
the
Dust Compartment
(4) line up as
shown circled left.
Next replace the
Conical Hepa Filter
(2)
inside the Cyclonic Filter, rotate the filter
clockwise towards the ‘LOCK’ position as
shown circled left.
8.
Finally place the
Motor Housing
(10) onto the
Dust Compartment
(4) and rotate clockwise
until the alignment mark lines up with the
locked symbol as shown circled right.
Replacing the Filters in Your Cordless Vacuum Cleaner
Care and Use of your Cordless Vacuum Cleaner
•
Always disconnect the cleaner from the mains charger before cleaning.
•
Clean outside of the cleaner with a clean damp cloth. Never clean with harsh or abrasive
cleaners.
•
Do not submerge the cleaner or its charger in water or any other liquids.
•
Empty the
Dust Compartment
(4) as soon as the ‘MAX’ mark has been reached.*
•
Wash the
Conical Hepa
and
Cyclonic Filters
(2) regularly
–
see table below.
•
Allow the filters to thoroughly dry out for 24 hours before reassembly and use.
*WARNING
do not
continue to use your vacuum cleaner once the ‘MAX’ mark has been
reached as permanent damage may occur to the appliance.
7
