WARRANTY DOES NOT COVER
GUARANTEE
The warranty period starts from the date of sale of the products and covers 2 years for all power products.
During the warranty period, free failures caused due to the use of poor-quality materials in the production and manufacturer
workmanship admitted fault are removed. The guarantee comes into force only when warranty card and cutting coupons are
properly filled. The product is accepted for repair in its pure form and full completeness.
• Mechanical damage (cracks, chips, etc.) and damage
caused by exposure to aggressive media, foreign objects
inside the unit and air vents, as well as for damage occurred
as a result of improper storage (corrosion of metal parts);
• Failures caused by overloading or product misuse, use of
the product for other purposes. A sure sign of overload
products is melting or discoloration of parts due to the high
temperature, simultaneous failure of two or more nodes,
teaser on the surfaces of the cylinder and the piston or
destruction of piston rings. Also, the warranty does not
cover failure of the automatic voltage regulator due to
incorrect operation;
• Failure caused by clogging of the fuel and cooling
systems;
• Wearing parts (carbon brushes, belts, rubber seals, oil
seals, shock absorbers, springs, clutches, spark plugs,
mufflers, nozzles, pulleys, guide rollers, cables, recoil
starter, chucks, collets, removable batteries, filters and
safety elements, grease, removable devices, equipment,
knives, drills, etc.);
• Electrical cables with mechanical and thermal damage;
• Product opened or repaired by a non-authorized service
center.
• Prevention, care products (cleaning, washing, lubrication,
etc.), installation and configuration of the product;
• Natural wear products (production share);
• Failures caused by using the product for the needs related
to business activities;
• If the warranty card is empty or missing seal (stamp) of the
Seller;
• The absence of the holder's signature on the warranty card.
WARRANTY CARD
Product
Model
Company
Date
of sale
Product
Model
Company
Date
of sale
Product
Model
Company
Date
of sale
The product is in good conditions and fully complete. Read and agree the terms of the warranty.
Product model
Serial number
Username
Date of sale
Company
Client's signature
EC DECLARATION OF CONFORMITY
Lithium Leaf Blower
Model: DALLB18-1
Brand:
We GBR Corp. LTD, Room 1002, 10/F., David House, 8-20 Nanking Street, Jordan, Kowloon, Hong
Kong, China, declare under our sole responsibility that this product is in conformity and accordance
with the following standards and regulations.
The undersigned is responsible for the compilation of technical documentation.
With this declaration of compliance we certify that articles: Lithium Leaf Blower are complying the
rules of Machinery Directive 2006/42/EC and the following harmonized standard have been com-
plied with EN 60335-1:2012+A1:2014 and EN 50636-2-100:201
Lithium Leaf Blower
Model Number: DALLB18-1, Brand DAEWOO
Power: DC 18V
No load speed:13000rpm(High)/9000rpm(Low),
Air speed:120MPH(High)/50MPH(Low),
Running time:10-15mins(high)/25-38mins(Low);
The DAEWOO Products authorized representative declares that these products described under
"technical data" are in compliance with:
Machinery Directive (2006/42/EC), Electromagnetic Compatibility Directive (2014/30/EU), EN
55014-1:2017 and EN 55014-2:2015.
is herewith confirmed to fulfill all the relevant provisions of
- A-weighed sound power level according to 8.6 of EN ISO 3744
L WA =87,85 dB(A) K=3dB(A)
-A-weighted emission sound pressure level according to EN ISO 11203
L pA = 67,85 dB(A) K=3dB(A)
Signature and Stamp on undersigned responsible.
Date: April, 2021
Summary of Contents for DALLB18-1
Page 9: ...8 EN 3 2 4 5 A B 1...
