4
EN
g) Use the power tool, accessories and tool bits etc. ,in accordance with these instructions and in
the manner intended for particular type of power tool, taking into account the working conditions
and the work to be performed. Use of the power tool for operations different from intended could
result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained
ADDITIONAL SAFETY RULES FOR GRASS TRIMMER
•
Only use this grass trimmer when a Residual Current Device (RCD) with a tripping current of not
more than 30 Ma is in the circuit.
If an extension cord is used make sure it is for outdoor use and marked as such. The recommended
size of extension cord is not lighter than 1.0mm2 and a maximum of 10 meters in length.
DANGER!
The cutting elements continue to rotate after the motor is switched off.
•
Before use check the supply and extension cord for signs of damage or ageing. If the cord beco
mes damaged during use, disconnect the cord from the supply immediately. Do not tough it before
disconnecting the supply.
•
Do not use the appliance if the cord is damaged or worn.
•
Read the instruction carefully. Be familiar with the controls and proper use of the equipment.
•
Keep extension cord away from cutting elements.
•
Wear ear, eye and dust protection at all times.
•
Never allow children, people unfamiliar with these instructions to use the trimmer
•
Avoid using the trimmer while people, especially children, infirm people or pets, are nearly.
•
Use the trimmer only in daylight or good artificial light.
•
Never operate the trimmer with damaged guards or shields or without guards or shields in place.
•
Switch on the motor only when the hands and feet are away from the cutting means.
•
Never fit metal cutting elements.
•
Use only the manufacturer’s recommended placement parts and accessories.
•
Always disconnect the trimmer from the mains when leaving the trimmer unattended.
•
Disconnect the trimmer from the mains before carrying out maintenance or cleaning work.
•
Inspect and maintain the trimmer regularly.
Have the trimmer repaired only by an authorised repairer.
•
If cordset is damaged only have it repaired or replaced by an authorised service centre.
•
Take care against injury from the blades fitted for trimmer the filament line length. After extending
new cutter line or replacing the spool line. Always return the trimmer to its normal operating position
before switching on.
•
Always ensure that the ventilation openings are kept clear of debris.
•
When not in use, store the trimmer out of the reach of children and infirm people.
WARNING!
In order to reduce the risk, disconnect the plug from the supply power, only use recom
mended accessories as required, otherwise personal injury may result.
•
Periodically inspect the condition of the cutting head. If the spool is damaged, switch off, remove
the plug from the power point and replace the spool.
•
Do not use the machine to cut grass, which is not on the ground. For example, do not cut grass,
which is on walls or rocks.
•
Do not switch on the machine in enclosed or poorly ventilated spaces or in the presence of inflam
mable and /or explosive substances such as liquid, gases and powders.
•
Always stop the trimmer and switch off at the mains when cutting is delayed or when walking from
one cutting location to another.
