background image

8

ANTENNA CONNECTION

Antenna 

The antenna requirements for a good color television reception are more important than those
for black & white television reception. For this reason,a good quality of outdoor antenna is
strongly recommended.

The following is a brief explanation of the type of connections that are provided with the various
antenna systems:

OUTDOOR ANTENNA CONNECTION

Use one of the following two diagrams if you connect an outdoor antenna.
A : Using a VHF/UHF combination outdoor antenna.
B : Using separate VHF and/or UHF outdoor antenna.
Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear
of the TV set.

1. A 75 ohm system is generally a round cable

with F-type connector that can easily be
attached to a terminal without tools.

2. A 300 ohm system is a flat "twin-lead" cable

that can be attached to a 75 ohm terminal
through a 300-75 ohm ADAPTOR.
(Refer to 300-75 ohm ADAPTOR as supplied)

300-ohm twin-lead cable (flat)

VHF/UHF ANTENNA

A. Combination VHF/UHF Antennas

B. Separated VHF/UHF Antennas

VHF ANTENNA   UHF ANTENNA

300/75-ohm

ADAPTOR

(as supplied)

300-ohm
twin-lead

300-ohm
twin-lead

300-ohm
twin-lead

75-ohm

coaxial cable

75-ohm coaxial cable

ANT/

CABLE

75

ANT/

CABLE

75

or

IN OUT

VHF/UHF  ANTENNA

COMBINER

(not supplied)

REAR OF TV

REAR OF TV

75-ohm coaxial cable (round)

F-type connector 

or

7

CONNECTING EXTERNAL EQUIPMENT

To connect a home VCR to the receiver, connect the coaxial cable from the RF OUT
socket of the VCR to the antenna socket of the TV SET, and connect the antenna lead-in
cable to the RF IN socket of the recorder.

VCR OPERATION BY USING THE RF OUT

ANTENNA

To "RF IN"

To antenna socket

To "RF OUT"

Coaxial cable

EARPHONES

The earphones must have an impedance of between 8 and 32 ohms and have a 3.5mm
stereo jack plug. 

1. Plug the earphone jack into the earphone socket on the right hand side of the TV. 
2. Adjust the volume of sound using VOL-,+ buttons.

NOTE : If earphone is inserted there will be no sound output at the loud speaker. 

Summary of Contents for DDQ-9H1SC


































Reviews: