3. Disassembly and reassembly of major components
3.1. Disassembly
3.1.1. General precautions
1) Maintenance operation should be carried out in a bright and clean place.
2) Before disassembly, provide parts racks for storage of various tools and disassembled parts.
3) Arrange the disassembled parts in the disassembly sequence and take care to prevent any
damage to them.
3.1.2. Engine oil
1) Take out the oil dipstick.
2) Remove the drain plug from the oil pan
and drain out the engine oil into a con-
tainer.
3) Reassemble the drain plug with the oil
pan after draining out the engine oil.
- 37 -
EQM3001I
3.1.3. Cooling water
1) Remove the drain plug from the cylinder
block and drain out the cooling water into
a container.
EQM3002I
3.1.4. Fan belt
1) Remove the fan guide and bracket.
2)
Loosen the tension adjusting nuts
installed on the alternator and air-condi-
tioning compressor, and take off the fan
belt.
EQM3003I