3.3.33. Exhaust manifold
1) Install the exhaust manifold gasket over
the stud bolts by aligning the gasket
with the exhaust port on the cylinder
head so that the face and back of the
gasket can be positioned correctly.
2) Semi-assemble the exhaust manifold
and install the heat resisting plate.
3) First, install the nuts and then place an
additional nut on each of them to pre-
vent looseness.
3.3.34. Turbocharger
1) Fit a new gasket over the stud bolts of
the exhaust manifold before tightening
those turbocharger fixing bolts.
2) Install the oil supply pipe and return
pipe.
3) Fit a gasket on the exhaust side of the
turbocharger to assemble the exhaust
elbow, then install the bracket onto the
cylinder block.
4) Semi-assemble the bracket to the intake
pipe, connect a rubber hose between
the turbocharger and intake pipe using
rubber hose, then assemble the bracket
completely.
- 75 -
EQM3096I
EQM3097I
EQM3098I
3.3.35. Starter
1) Assemble the starter in position on the
flywheel housing.
EQM3099I
