11
IInnssttaalllliinngg
&
&
A
Addjjuussttiinngg
Y
Yoouurr
P
Phhoonnee
D
Deesskk//TTaabbllee
TToopp
IInnssttaallllaattiioonn
1. Plug in the AC adaptor cord into the
plug in the bottom of the base, labelled
icon
2. Plug the AC adaptor into a standard
230/240 VAC wall outlet.
3. Place the AC adaptor cord around the
strain relief.
4. Charge the battery (refer to Charging
the Battery Pack).
5. Plug one end of the telephone cord
into the tel line jack on the bottom of
the base.
6. Plug the other end of the cord into
your telephone jack on the wall.
7. Place the line cord around the strain
relief.
C
CA
AU
UTTIIO
ON
N
Use only the AC Adaptor supplied with this phone.
IInnssttaalllliinngg
tthhee
H
Haannddsseett
B
Baatttteerryy
P
Paacckk
1. Press in on the battery cover and slide the cover down until
it comes off.
2. Align the plastic connector of the Metal Nickel Hydride
battery pack with its socket and plug it in.
3. Place the battery pack inside.
4 Slide the battery cover on until it snaps into place.
8. Set the base on a desk or tabletop
and place the handset into the base
as shown.
AC
Adapter
Telephone
Jack
Be sure to fully insert the battery plug into the socket.
N
NO
OTTE
E
Dectom.qxd 2/09/99 15:59 Page 11
