background image

INTRODUCTION

CONNECTIONS

11

Connections

Connections

Connecting Antenna/Cable

1

Disconnect the antenna/cable from the rear of your TV. 

2

Connect this cable to the jack marked RF IN (FROM ANT.) on
the rear panel of the DVD RVCR.

If your cable wire is connected to your TV without a converter or descrambler box, remove the coax plug from
your TV and attach it to the RF IN (FROM ANT.) jack on the rear panel of the DVD RVCR.
Use the supplied coaxial cable to connect between the DVD RVCR’s OUT (TO TV) jack and the  antenna
input jack on your TV. With this connection, you can receive all midband, superband, and hyperband channels
(all cable channels).

• There are a variety of ways to connect the DVD RVCR to your TV and other equipment. Use only one of

the connections described below. Whichever TV connection you use will work with all input sources.

• Please refer to the manuals for your TV, VCR, stereo system, or other devices as necessary to make the best

connections.

• For better sound reproduction, connect the DVD RVCR’s AUDIO OUT jacks to the audio in jacks of your

amplifier, receiver, stereo, or audio/video equipment. See ‘Connecting an Amplifier/Receiver‘ on page 11.

Caution

• Make sure the DVD RVCR is connected directly to the TV, and the TV is set to the correct video input.
• Do not connect the DVD RVCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.
• Do not connect the DVD RVCR via your VCR. The DVD image could be distorted by the copy protection

system.

Rear of DVD RVCR

Antenna

Antenna

Cable TV
Wall Jack

Flat Wire
(300ohm)

300/75ohm Adapter

(Not supplied)

OR

OR

DF-T35-37D2P-WB  2006.8.24 4:57 PM  ˘

` 11   mac001  1200DPI 90LPI

Summary of Contents for DF-4500P/4700P






























































Reviews: