In DFZ-336, the knob of the thermostat should
be selected to the freezing range of
1
~
7
(usually set at
5
). Position
1
is in
weak cold
condition and Position
7
is in
strong cold
condition. If fast freezing is needed,
the knob of the thermostat should be set to the position
7
Turn it to its original position when the articles are frozen. Do not fast-freeze for
more than 4~5 hours as it is not good for the refrigerating system.
In refrigeration mode the knob of the thermostat is adjusted to the position
of
refrigeration
, When the knob of the thermostat is set to different position,
the temperature in the freezer will be changed accordingly.
When it is set to the position of
weak
, temperature in the freezer will be high;
When it is set to the position of
strong
, temperature in the freezer will be low.
Note: Never use metal utensils to scrape off frosting layers.
In normal condition, power interruption should be avoided. Should
power be interrupted accidentally, do not power on within five minutes to
avoid damage to compressor.
It is suggested that the freezer be cleaned periodically generally clean it
every 30~45 days. Unplug before cleaning and use soft cloth with neutral
soap water or mild detergent to scrub inside and outside of the cabinet.
Dry it with a soft cloth. Never use water to rinse the freezer.
3
5
Operation Tips
Cooling
5
6
7
OFF
1
2
3
4
Refrigeration
Summary of Contents for DFZ-233
Page 1: ...DFZ 233...
