When the machine be connected power a beep is now heard and “ 3:00” appears in the
display after a short time. The two dots between the “3” and “00” aren’t constantly lit.
The machine is now ready to operate and is automatically set to program “1” (normal
position), but has not yet started.
Functions & Operation
Control panle
DI-3200S bread maker is operated by 6 buttons,with big window LCD display
Program menu:
This is used to select the baking program menue. Each time it is pressed (accompanied
by a short beep ) the program changes. The current program is shown by LCD
display,the machine have 12 program manues,see the operation cycle of DI-3200
bread maker.
Color of crust:
This is used to select a light, medium or dark colour for the crust.
Loaf size:
This is used to select a small or a larger loaf setting for bread receips.
START / STOP
button
This start and stops or finishes the selected baking program .
START:
in order to start a program ,press for approx. 1 second on the
“START/STOP” button . A short beep is heard and the two
dots in the time display begin to flash and the program starts.
finishes the selected baking program .
STOP:
in order to stop a program , press the “START/STOP”
button for approx. 2 seconds until a beep confirms that the
program has been switched off.
On/Off
Two dots flashing: Program is started
Two dots continuously lit: Program is stoped
Delay Timer
You can delay the time you bread maker starts to have fresh bread ready when you get
up in the morning or when you come from work.
Use the “TIMER “botton to advance the time in 10minutes increments,if
necessary,use the “TIMER “botton to decrease the time,when the delay timer is set
where you want it ,make sure to press the “START /STOP”botton,the colon”:”will flash
and your bread will be ready when you planned.
The time which appears on the clock after it switches on automatically is the remaining
-EN2-
