16
and water inlet valve. These two valves open and warm up the freezing surface, so
the cubes to fall into the bin. The freeze cycle will restart.
How the machine uses water
The ice maker begins
with a fixed charge of
water that is contained
in the water bin. As
the water is sprayed
against the freezing
evaporator surface,
the portion of water
that does not contain
mineral impurities
will freeze and stick
to the ice cube molds.
The water containing
impurities falls back into the water bin. Gradually, during the freezing portion of
the ice-making cycle, the water in the water bin will become highly concentrated
with mineral impurities.
During the harvest cycle, the fresh water flows into the machine to dilute the bin
water, and to rinse the concentrated minerals down the drain.
Normal Sounds
Your new ice maker may make sounds that are not familiar to you. Most of the
new sounds are normal. Hard surfaces like the floor, walls and cabinets can make
the sounds seem louder than they actually are. The following describes the kinds
of sounds that might be new to you and what may be making them.
•
You will hear a swooshing sound when the water valve opens to fill the water
bin for each cycle.
•
Rattling noises may come from the flow of the refrigerant or the water line.
Items stored on top of the ice maker can also make noises.
•
The high-efficiency compressor may make a pulsating or high-pitched sound.
•
Water running from the water bin to the evaporator plate may make a
splashing sound.
