-28-
KEY
Name
Details
Function
remark
DEFAULT
ADJUSTMENT
OPERATING
S10
PC MODE
PC SIGNAL ADJUSTMENT
METHOO
(IF EEPROM ERASE(S5) IS ON, THIS SETTING IS ERASED.
DEFAULT
ADJUSTMENT
GAIN R
10
FIX
S10
PC ADJUSTMENT
GAIN G
10
FIX
GAIN B
10
FIX
OFFSET R
-30
FIX
OFFSET G
-30
FIX
OFFSET B
-30
FIX
TELETEXT
west-eu, east-eu, russia, greek, arabic, farci, arabich
TTX language select
S11
OPTION
OPTION
TOP&FLOP, TOP, FLOP, NON
TTX sorting mothod select
DELAY
03 (PAL=1 YC DEALY)
FIX
It is erased factory
S12
Shipping
-
freqency table
(exepting for s8,9,10,11)
5-2-2. Description of SERVICE MODE ITEM
A. S1(1): Heat-Run Key
=> This key can check ROM VERSION.
B. S2(2): I2C STOP Key
=> This key only use for R&D.
C. S3(3): Sound/ Timer test Key
=> This key can check sound and decide a defect of Timer LED.
D. S4(4): Tilt test Key
=> This key only use for adjustment of factory.
E. S5(5): EEPROM Erase Key
=> After Mi-com update, you must erase EEPROM data using this key.
F. S6(6): DECODER Key.
=> For the CVBS signal (Main and Sub in PIP mode) adjustment, this key adjust
brightness, contrast and color.
G. S7(7): PANEL TEST Key.
=> Using this key, you can test problem of PANEL, as confirm white pattern, red pattern,
blue pattern, green pattern
H. S8(8): PANEL WHITE BALANCE Adjustment Key
=> Using this key, you can adjust PANEL WHITE BALANCE.
GAIN R,G,B: As adjust this factor, you can increase or decrease Contrast of each color.
OFFSET R,G,B: As adjust this factor, you can increase or decrease Black Level of
each color.
I. S9(9): COMPONENT VIDEO Adjustment Key
=> Using this key, you can adjust WHITE BALANCE of COMPONENT VIDEO.
Y, Cb, Cr DRIVE: As adjust this factors, you can increase or decrease Contrast of each color.
Y, Cb, Cr OFFSET: As adjust this factor, you can increase or decrease Bright Level
of each signal.
J. S10(10): PC ADJUSTMENT Key.
=> Using this key, you can adjust WHITE BALANCE of PC.
GAIN R,G,B: As adjust this factor, you can increase or decrease Contrast of each color.
OFFSET R,G,B: As adjust this factor, you can increase or decrease Bright Level of each color.
K. S11(LOCK): OPTION Key
=> Using this key, you can select TTX language, TTX sorting method.
TELETEXT(language): West-EU, East-EU, Russia, Greek, Arabic, farci, arabich
OPTION(sorting method): TOP&FLOP, TOP, FLOP, NON
DELAY: Don
’
t Adjust this factor.
L. S12(SLEEP): Shipping key
=> Using this key, you can set up at shipping mode.
Summary of Contents for DLP-2612
