background image

SP000014

Page 7

Track Excavator Safety

 WARNING!

Improper operation and maintenance of this machine
can be hazardous and could result in serious injury or
death.

Operator and maintenance personnel should read this
manual thoroughly before beginning operation or
maintenance.

Keep this manual in the storage compartment to the
rear of the operator's seat, and have all personnel
involved in working on the machine read the manual
periodically.

Some actions involved in operation and maintenance of
the machine can cause a serious accident, if they are
not done in a manner described in this manual.

The procedures and precautions given in this manual
apply only to intended uses of the machine.

If you use your machine for any unintended uses that
are not specifically prohibited, you must be sure that it
is safe for any others. In no event should you or others
engage in prohibited uses or actions as described in
this manual.

DOOSAN

 delivers machines that comply with all

applicable regulations and standards of the country to
which it has been shipped. If this machine has been
purchased in another country or purchased from
someone in another country, it may lack certain safety
devices and specifications that are necessary for use in
your country. If there is any question about whether
your product complies with the applicable standards and
regulations of your country, consult 

DOOSAN

 or your

DOOSAN

 distributor before operating the machine.

Summary of Contents for Doosan DX140LC

















Reviews: