FEATURE
NTSC SYSTEM
REMARK
Deck Mechanism
Head Width
NTSC: RÕ:48
µ
m, L:26
µ
m/R:26
µ
m, LÕ:58
µ
m
Full Loading
Yes
- Condition in Power off
Unloading
Stop ->Play Time
About 1Sec
FF->REW Time
3 min Under(T-120/E180 TAPE)
Dew Sensor
No
Auto Head Cleaner
No
DLC Coated Drum
Yes
Video
Video Head
4 Head
Color Signal/Playback
NTSC : NTSC Signal
Horizontal Resolution
WITH COLOR : 230 Line
Special Effect
Forward Search Speed
NTSC-SP(2H) : X3, X5/ EP(6H) : X9, X15
Reverse Search Speed
NTSC-SP(2H) : -1X, -X3, -X5/ EP(6H) : -1X, -X9, -X15
Still
Yes
Still Knob
Yes
Slow
Yes
RMC, SET : FF/REW
Variable Slow Speed
Ô1/5<- 1/10<-1/15 (STILL)1/15<-1/20<-1/30
Syscon
Tape Speed on Play
NTSC SYSTEM
Tape Speed on Record
: 002/006/018/030/048/072/096/120/168/240/360/480/720/960
Audio Recording
NTSC SYSTEM : 002/006/018/030H
Real Time Recording Fields
NTSC: 20.0Fields/sec (18Hour Mode/T-120 Tape)
Auto Clear Time
Manual Clear
No(Sensor)
Manual Tracking
In the Panel : TRK -/+ Knob common used
Remocon : TRK +/- Knob common used
Counter Reset
Yes(Clear Knob)
Syscon Counter Zero Search
Yes
Auto Operation
- Auto power on & go
No
- Auto power on by cassette-in
Yes
- Eject is working in VCR OFF
Yes
- Eject is working in monitor OFF
No
Auto Play
No
Timer
Events
8Events(MENU SET)
Running Time Display
Yes(MENU SET)
The Play time of DRUM
Running Time Reset
Press the POWER+TIMER Key during 3secs simultaneously.
In case of No tape status
Buzzer Setting
Yes(MENU SET)
Language Setting
NTSC System : No
Error Display
Clear with the TIMER Knob
OSD Display
- In case of Tape in/out is not possible.
E-01
If Input the TIMER KEY when cancel ERROR
- In case of playing of Tape is not possible.
E-02
state, and VCR is the POWER OFF Mode.
- In case of playing of Drum is nor possible.
E-03
- In case of the cut of Tape
E-04
Select the Buzzer On/Off
According to the buzzer setting status, it is to be On/Off
: In case of tape in without Tap
: In case of pressing the REC Knob
In case of On (About 5times ring)
: In case of pressing the Timer Knob
In case of On (About 5times ring)
-Tape Out in the T.REC wating MODE
In case of On (About 5times ring)
- Input the Alarm signal during REC & STOP
- Input the Alarm signal,
in the (Tape Out/Tape In without Tap tape )
Buzzer always OFF status
No matter what Buzzer Setting, always OFF status
- When the Tape ending point , during REC.
Always Off status upkeep
Tape Eject -> VCR Power Off
Buzzer always ON status
No matter what Buzzer Setting, always ON status
Error status
If TIMER Key is pressed, Buzzer
- In case of Tape in/out is not possible.
operate.Clear the ring.
- In case of playing of Tape is not possible.
If Input the TIMER KEY when cancel ERROR
- In case of playing of Drum is nor possible.
state, and VCR is the POWER OFF Mode.
- In case of the cut of Tape
6
FEATURES & SPECIFICATION
RECORDER
Summary of Contents for DQ-K2121N-P
