1
Press [SETUP]. The Setup menu
appears.
2
Use [
…†
] to select ‘
Preference
‘.
3
While ‘
Preference
‘ is selected, press [
…†
] to select ‘Audio‘.
4
Press [
ENTER
]. The ‘Audio‘ submenu is displayed.
Digital Output
1
Use [
…†
] to select ‘Digital Output‘ while the Audio submenu is
displayed.
2
Press [
ENTER
] to go to the second level.
3
Use [
…†
] to select the desired digital output type.
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the m
enu.
Bitst
ream
Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby
Digital or DTS decoder).
PCM
Select when connected to a digital amplifier. The DVD Recorder's digital audio signal will be output in the PCM
format when you play a DVD recorded with a Dolby Digital (only for DVD) or MPEG soundtrack. If the DVD is
recorded with a DTS sound track then no sound will be heard.
Dynamic Range
While watching DVD movies, you may wish to compress the dynamic range
of the audio output (the difference between the loudest and quietest
passages). This allows you to listen to a movie at a lower volume without
losing clarity of sound.
Set 'Dynamic Range' to any mode you want for this effect.
Follow the same procedure as ‘Digital Output‘ to set the Dynamic Range.
‘
Preference
’ / Audio Settings
24
Setup
Preference > Audio
Preference > Audio
Preference
†
†
†
Video
Audio
Parental Control
Change Password
Auto Setting
†
†
†
†
Digital Output
√ Bitstream
Dynamic
PCM
†
†
†
†
Digital Output
Full
Dynamic
Middle
√ Off
Confirm
Back
Exit
ENTER
MENU
SETUP
Confirm
Back
Exit
ENTER
MENU
SETUP
Confirm
Back
Exit
ENTER
MENU
SETUP
DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘
` 24 mac001 1200DPI 90LPI
