background image

31

Time Lapse Video Cassette Recorder

30

Time Lapse Video Cassette Recorder

Alarm Scan

1

Repeat steps 1 to 3.

2

Press the SHIFT

button to search forward or in

reverse without entering a specific alarm number.

•  The display returns to the normal screen.
•  The VCR will advance (or rewind) the tape at high

speed, and playback the first 5 seconds of every alarm
recording.

•  To cancel the alarm scan mode, press the  STOP button.

3

While the desired recording is being played back,
press the PLAY button.

•  Playback will start, and alarm scan is cancelled.

Index Search

1

Repeat steps 1 to 2.

2

Move the arrow mark (

) to the FF or REW in the

Index Search mode as you want to search.

3

Press the SHIFT

button to search forward or in

reverse.

•  The display returns to the normal screen.
•  The VCR will advance (or rewind) the tape at high

speed and playback the first 5 seconds of  every normal
recording.

•  To cancel the index search mode, press the STOP

button.

4

While the desired recording is being played back,
press the PLAY button.

•  Playback will start, and index search is cancelled.

• In the index search mode,

SHIFT

button should be

used to search forward or
in reverse ( Index FF /
REW).

Recording Check

During recording, press the REC CHECK button.

• The tape will be rewound for about 5 seconds and  slow

play mode will be performed. The VCR will then return
to the previous recording mode.

Alarm Search

1

Press the Menu button to display the initial menu.

2

Press the SHIFT

button to select Search Select,

then press the SHIFT

button to display the SEARCH

SELECT menu.

3

Move the arrow mark (

) to FF or REW in the

Alarm Search mode as you want to search.

4

Press the SET –(or +) button to enter the number of
alarm marks you want to search, press the SHIFT

button to search forward or in reverse.

•  The display returns to the normal screen.
•  The VCR will locate the desired alarm recording and

begin playback.

• During recording check

operations, recording is
suspended momentarily.

Summary of Contents for DT-K6323D-KS3


























Reviews: