●
Pushing this button cuts off the sound reproduced from the speaker and then
" " will be displayed on the screen with red color.
To return the sound, press it again and then " " will be displayed on the screen
with green color.
●
With this button, up to 2 hours every 10 minutes can be set to the sleep-timer.
●
If you press the "SLEEP" button for the first time, " - - - MINUTE" sign of the nonset
sleep-timer appears on the upper left side of the screen.
●
This display appears for 3 seconds unless any button is pressed.
Whenever pressed again, the setting time is increased by 10 minutes
●
OSD characters remains on TV screen for the interval of 3 seconds. Then, it will
disappear from the TV screen and set up sleep function mode simultaneously.
On the other hand, if the ENTER button is pressed before the time interval of 3
seconds, the OSD will automatically disappear from TV screen and set itself to sleep
function mode.
●
When the remaining time become "0", the TV receiver is turned off.
17
In order to change from TV mode to AV mode, press the TV/VIDEO button on the
remote control unit or TV/VIDEO button on the front of the receiver.
At this time, the "VIDEO" is displayed on the upper left side of the screen.
TV/ VIDEO
MUTE
SLEEP
TV
VIDEO
TV
TV/ VIDEO
TV/ VIDEO
VOL
VOL
(VOL ON STATE)
GREEN
RED
MUTE
MUTE
--- MINUTES
10MINUTES 120MINUTES
SLEEP
SLEEP
SLEEP
Summary of Contents for DTC-1472
Page 1: ......
