Daewoo DTC-150, User Manual

5

If incoming call is from an area without Call ID service, LCD displays “…o…” 

The current date and time will be updated by the FSK Caller ID signal while the year setting remains 

unchanged. DTMF Caller ID signal will not change the date and time setting as it only contains the caller’s 

number. 

Reviewing Incoming Call 

In on-hook or off-hook state, press 

[

▲

] 

or 

[

▼

] 

key to review the incoming calls, LCD displays …END… when 

all records are checked. 

NOTE:

 Press and hold 

[

▲

]

 or 

[

▼

] 

key for 3 seconds, you can quickly check incoming calls. 

Calling Back Incoming Call 

Calling back the local area call: The unit can auto-filter local area code. Review the desired number and press 

[REDIAL] 

key to dial back the number displayed on LCD, then pick up the handset to conversation. If the line 

is busy, press 

[REDIAL] 

key to dial out the number repeatedly 

Calling back the long distance call: 

If LCD displays a number

which

is long distance call, press 

[REDIAL]

 key two times, the unit will auto-add “0” 

and dial out the number displayed on LCD, then pick up the handset to conversation. If the line is busy, press 

[REDIAL] 

key to dial out the number repeatedly. 

Deleting Incoming Call 

1.  Review the desired incoming number   

2. Press 

[DEL]

 key to delete the number, then LCD displays the next number. 

NOTE:

 Press 

[DEL]

 key for 3 seconds, all the incoming message will be erased. 

REVIEWING, CALLING BACK AND DELETING OUTGOING CALL                                          

The phone can record 5 outgoing messages, sequence number and conversation time. You may review, call 

back and delete outgoing calls. If over 5 outgoing calls, the earliest one will be replaced. When you review 

outgoing call, LCD will not display real date and time, but display the conversation time. 

Reviewing outgoing Call 

1.  In on-hook or off-hook state   

2. Press 

[OUT]

 key, LCD displays the last dialed number. 

3. Press 

[OUT] 

key continuously, LCD displays …END… when all records are checked. 

Dial back outgoing Call 

1.  In on-hook state or off-hook state. 

2. Press

 [OUT] 

key to check the desired number. 

3. Press 

[REDIAL] 

key, the number will be dialed out automatically, then pick up the handset to conversation. 

If the line is busy, press 

[REDIAL] 

key to dial out the number repeatedly. 

Deleting outgoing Call 

1.  Review the desired outgoing number   

2. Press

 [DEL]

 key to erase the number, and LCD displays the next number. 

NOTE 

Press 

[DEL]

 key for 3 seconds, all the outgoing calls will be erased.