19
4. Press
UP/
－
or
DOWN/+
key to set the first code, press
SET/STORE/÷
key to confirm. Set the
second code by same way. If PABX code has one digit only, set the second digit to “-”.
¾
Setting Flash time
1. At on-hook state, press
SET/STORE/÷
key and
UP/
－
key three times, LCD displays
SET 4
FLASH
2. Press
SET/STORE/÷
key again, LCD displays
FLASH 4 110
3. Press
UP/
－
or
DOWN/+
key to edit the Flash time to 110, 300, 600 or 1000ms.
4. Press
SET/STORE/÷
to confirm.
¾
Setting the LCD contrast
1. At on-hook state, press
SET/STORE/÷
key and
UP/
－
key four times, LCD displays
SET 5
LCD
. Press
SET/STORE/÷
key again, LCD displays
LCD 3
2. Press
UP/
－
or
DOWN/+
key to adjust the LCD contrast, total 5 levels can be selected.
3. Press
SET/STORE/÷
key to confirm.
Note: Alternatively in on-hook state, press R key continually to adjust the LCD contrast to the
comfortable level, press DEL key to save and quit.
¾
Setting normal alarm clock
1. At on-hook state, press
SET/STORE/÷
key and
UP/
－
key five times, LCD displays
SET 6
ALERT
2. Press
SET/STORE/÷
key, LCD displays
1 00-00 OFF
and the number “
1
” flashes, press
UP/
－
or
DOWN/+
key to select the group number from 1~3. Press
SET/STORE/÷
key to go into
the alarm time setting.
3. Use
the
UP/
－
or
DOWN/+
to adjust the alarm time, and press
SET/STORE/÷
key to confirm
every digit.
4. After setting alarm time, the
OFF
flashes; press the
UP/
－
or
DOWN/+
key to select
ON
.
5. Press
SET/STORE/÷
key to confirm.
6. Set the rest 2 groups normal alarm clock by the same way.
Note: After time runs up to the set alarm time, the phone will send out “DI, DI” sound for 1 minute.
Press any key to stop alarming and return to on-hook state.
The alarm clock is available only when the phone is connected to telephone line.
¾
Setting anti-dialing from parallel phones
1. At on-hook state, press
SET/STORE/÷
key and
UP/
－
key six times, LCD displays
SET 7 PPP
2. Press
SET/STORE/÷
key to confirm, LCD displays
PPP OFF
3. Press
UP/
－
or
DOWN/+
key to select
ON
.
4. Press
SET/STORE/÷
key to confirm, LCD displays a
icon.
Note: After setting it to ON, it will not allow making and receiving calls from parallel phones,
otherwise it will send out “di-du” tone. So please set it as OFF if you connect any extension to the
phone, otherwise the extension phone cannot work properly.
Summary of Contents for DTC-360
