20
¾
Setting baby-call function
1. At on-hook state, press
SET/STORE/÷
key and
UP/
－
key seven times, LCD displays
SET 8
BABY
.
2. Press
SET/STORE/÷
key again, LCD displays
BABY OFF
or
BABY ON
3. Press
UP/
－
or
DOWN/+
key to select ON or OFF.
4. When
select
BABY ON
, press
SET/STORE/÷
key to confirm, LCD displays
INPUT CODE
5. Input the baby-call number using numeric keys.
6. Press
SET/STORE/÷
key to confirm.
After you set baby-call function at ON, pick up handset or press any key (except the
SET/STORE/÷
key), the baby-call number will be dialed out automatically.
Note:
If the lock is at the position of forbidding all, the baby-call function is not effective.
¾
Set extension code for transferring calls
1. At on-hook state, press
SET/STORE/÷
key and
UP/
－
key eight times, LCD displays
SET 9
ECODE
2. Press
SET/STORE/÷
key again, LCD displays
ECODE --
.
3. The first “-” flashes to indicate to set the first digit extension code.
4. Press
UP/
－
or
DOWN/+
key to select it from 0~9, press
SET/STORE/÷
key to confirm. Set
the second digit by same way. Both digits extension code are required, otherwise it is not
available.
Note: Please refer the section “INTERCOM AND TRANSFER CALL FUNCTION” to perform
intercom calls and transfer incoming calls with the help of the extension code.
¾
OPERATIONS DESCRIPTION
CALLER ID MESSAGE
1. When a call comes in, the telephone rings, and LCD displays the seq. number of the call, the
date, time, incoming number and
NEW
icon. The current date and time will be updated by the
FSK Caller ID signal while the year setting remains unchanged. DTMF Caller ID signal will not
change the date and time setting as it only contains the caller’s number.
2. If the number has come twice and has not been checked, LCD displays
REP
icon.
3. If the caller has subscribed the private service, LCD displays
---P---
; when the message is
wrong, LCD displays
---E---
; when the caller has not got the Caller ID service, LCD displays
---o---
4. When incoming memory is full, the last incoming number is always replacing the oldest
number except VIP numbers.
5. If there are missed calls haven’t been reviewed, the NEW LED can flicker to indicate, and will
not stop until you reviewed all missed calls.
Summary of Contents for DTC-360
