EN
35
The following procedure describes how to use this function:
1) In idle mode, enter the desired number. During entering, you can press
RD/P
key to
correct the number.
2) Press
or key, the unit will dial out the number show on the LCD.
Redial
Press
or key, press
RD/P
key, the last dialed number will be dialed again.
To Lock/Unlock the keypad
To lock the keypad
Press and hold the
key for about 2 seconds.
You will hear a beep tone, “
HS LOCKED
” will appear on LCD. While the keypad is locked, any
key you press is invalid.
To unlock the keypad
Press and hold the
key for about 2 seconds.
You will hear a beep tone and it will go back to idle mode.
MULTI-HANDSET OPERATION
Maximum 5 handsets can be linked to the same base unit. Maximum 4 bases can be linked
to the same handset.
If you have more than one handset registered with one base, there are some advanced
functions, operation it by the follow ways:
Intercom
The intercom feature is activated by pressing the
INT
key.
1. In idle mode, press
INT
key once.
2. The user will be prompted to select the number of the internal handset with which you
wish to connect, press the registered number of the handset you want to call
3. The destination handset will ring, press
key or key to enter conversation mode. To
end intercom mode, any handset press key.
Call transfer
During a call, it’s to transfer the call to another handset.
1. During a phone call, press
INT
key once, you will be prompted to select the number of
the internal handset with which they wish to connect, press the registered number of the
handset you want to call
2. The destination handset will ring. With the melody defi ned for an internal call.
3. Press
key or key of the ringing handset to accept the call.
4. The two internal handsets will be connected. To complete the transfer of the call, the
initiating handset should be placed on the cradle and the external call will now be
connected to the second handset.
