17
___
Dialing pause
Extending the Telephone System
When using private branch exchanges, it is necessary to dial an access code to obtain the dialing tone for
an outside line. When using some older private branch exchanges, it takes a little time before the dialing
tone becomes audible. In the case of such private branch exchanges, a dialing pause can be inserted after
the number for an outside line in order to continue dialing directly without having to wait for the dialing
tone.
3 sec.
Insert a dialing pause
The actual phone number is dialed a certain time after the number for an outside line.
The dialing pause can also be entered with the phone numbers in the phone book.
Caller number display (CLIP
1
)
The caller number display (CLIP) is a supplementary service offered by your telephone
network provider. Contact your network provider for further information.
If this function is available with your telephone line, the number of the caller appears in the display when
the phone rings. If the caller has suppressed transmission of his phone number, the corresponding
message appears in the display. The phone number is not displayed and, as a result, is not stored in the
call list.
Answering machine in the telephone network
An answering machine in the telephone network is a supplementary service offered by many telephone
network providers. If your telephone network provider offers an answering machine in the telephone
network for you, an icon on the display informs you of new messages received (
VMWI
2
). This function can
only be used when your telephone network provider actually offers the service. Contact your network
provider for further information.
11 Extending the Telephone System
The international
GAP
3
standard regulates the compatibility of handsets and base stations from different
manufacturers. As a result, it is possible to integrate DAEWOO devices and devices from other
manufacturers together in one telephone system. It is possible, however, that some functions are not
available.
Multiple handsets
Up to 5 handsets can be registered on the base station.
Registering handsets
Before starting to register a handset, switch the base station to Registration mode.
3 sec.
Enable Registration mode
Now register the handset,
Page 15. The currently valid PIN code is used for registration purposes;
Page 15.
The handset is automatically assigned an internal call number following registration. The internal call
number appears in the display.
1
CLIP
:
C
alling
L
ine
I
dentification
P
resentation = Displays the caller’s phone number.
2
VMWI
:
V
isual
M
essage
W
aiting
I
ndication = Visual indicator that new messages have been
recorded.
3
GAP
:
G
eneric
A
ccess
P
rofile = Standard for the interoperation of handsets and base stations from different
manufacturers.
Summary of Contents for DTD-3000
